ul. Pogodna 11, 16-020 Czarna Białostocka

Production presses

Hydraulic presses with bottom table

prasa hydrauliczna 80 ton

Specification

Strength [tn] – 50

Engine power [kw] – 4

Throat depth [mm] – 265

Working speed [mm / sec] – 6.3

Approach speed [mm / sec] – 30

Return speed [mm / sec] – 42

Pressure [bar] – 320

Piston stroke [mm] – 250

Bottom table size [mm] – 450 x 450

Vertical height [mm] – 400

Working height [mm] – 850

Overall length (side) [mm] – 1350

Overall width (front) [mm] – 760

Total height [mm] – 2020

Weight [kg] – 1480

Strength [tn] – 80

Engine power [kw] – 4

Throat depth [mm] – 290

Working speed [mm / sec] – 3.8

Approach speed [mm / sec] – 19

Return speed [mm / sec] – 28

Pressure [bar] – 320

Piston stroke [mm] – 250

Bottom table size [mm] – 500 x 500

Vertical height [mm] – 400

Working height [mm] – 850

Overall length (side) [mm] – 1330

Overall width (front) [mm] – 780

Total height [mm] – 2090

Weight [kg] – 1750

Strength [tn] – 100

Engine power [kw] – 5.5

Throat depth [mm] – 325

Working speed [mm / sec] – 4.8

Approach speed [mm / sec] – 21

Return speed [mm / sec] – 32

Pressure [bar] – 320

Piston stroke [mm] – 250

Bottom table size [mm] – 550 x 550

Vertical height [mm] – 400

Working height [mm] – 900

Overall length (side) [mm] – 1470

Overall width (front) [mm] – 850

Total height [mm] – 2150

Weight [kg] – 2500

Strength [tn] – 150

Engine power [kw] – 7.5

Throat depth [mm] – 375

Working speed [mm / sec] – 3.9

Access speed [mm / sec] – 20

Return speed [mm / sec] – 30

Pressure [bar] – 320

Piston stroke [mm] – 250

Bottom table size [mm] – 650 x 650

Vertical height [mm] – 400

Working height [mm] – 950

Overall length (side) [mm] – 1660

Overall width (front) [mm] – 900

Total height [mm] – 2295

Weight [kg] – 3750

Optional equipment

  • 600 mm vertical clearance
  • 800 mm vertical clearance
  • Piston stroke 450 mm
  • A set of punching tools for diameters from 6 mm to 40 mm with flexible pressure
  • Mechanical cylinder adjustment (only 80 and 100 tonnes available)
  • Hydraulic cooling devices through an air-oil system
  • Hydraulic ejector

Available models

  • CD-50
  • CD-80
  • CD-100
  • CD-150
prasa 50 ton

CONTROL PANEL WITH EUROPEAN ELEMENTS
(ITEMS ARE AVAILABLE WORLDWIDE)

  • Presses with a C frame consist of a welded steel frame ST-52.3 and have been designed for stamping, stamping and forming as part of the production line.
  • The CD models have a mechanized bottom table (made of CK-42 stainless steel) with two T-slots (DIN650).
  • The press has a double-acting cylinder (with rotation protection) with a chrome piston rod and a replaceable bottom plate to avoid damage to the piston. The actuator is machined at the bottom to adapt tools or dies.
  • The cylinder stroke can be easily adjusted via stops on both sides of the press.
  • The electric hydraulic unit is equipped with two speeds and automatic high speed disconnection.
  • The control panel is equipped with a manual or semi-automatic mode switch and a switch for two speeds of the actuator movement (high approach speed and low ironing speed).
  • CD models are operated using a two-handed button connected to the IV safety module.
  • Safety on models with the C-frame is guaranteed by two side protective screens (which can be opened) with class IV photoelectric sensors on the front.
  • The press can be delivered with optional hydraulic cushions or ejectors, with a higher speed or geometry suited to your requirements.
  • The device has a two-year warranty, it is made in Europe meets the latest requirements of the CE certificate.

Hydraulic presses with top and bottom tables

prasa hydrauliczna 100ton

Specification

Strength [tn] – 50

Engine power [kw] – 4

Throat depth [mm] – 265

Working speed [mm / sec] – 6.3

Approach speed [mm / sec] – 32

Return speed [mm / sec] – 42

Pressure [bar] – 320

Piston stroke [mm] – 250

Bottom table size [mm] – 700 x 450

Upper table size [mm] – 550 x 300

Vertical height [mm] – 400

Working height [mm] – 850

Overall length (side) [mm] – 1290

Overall width (front) [mm] – 1160

Total height [mm] – 2085

Weight [kg] – 1750

Strength [tn] – 80

Engine power [kw] – 5.5

Throat depth [mm] – 290

Working speed [mm / sec] – 6

Approach speed [mm / sec] – 25

Return speed [mm / sec] – 36

Pressure [bar] – 320

Piston stroke [mm] – 250

Bottom table size [mm] – 700 x 500

Upper table size [mm] – 600 x 350

Vertical height [mm] – 400

Working height [mm] – 850

Overall length (side) [mm] – 1460

Overall width (front) [mm] – 1210

Total height [mm] – 2090

Weight [kg] – 2350

Strength [tn] – 100

Engine power [kw] – 7.5

Throat depth [mm] – 325

Working speed [mm / sec] – 6.2

Approach speed [mm / sec] – 31

Return speed [mm / sec] – 48

Pressure [bar] – 320

Piston stroke [mm] – 250

Bottom table size [mm] – 800 x 550

Upper table size [mm] – 650 x 400

Vertical height [mm] – 400

Working height [mm] – 900

Overall length (side) [mm] – 1590

Overall width (front) [mm] – 1240

Total height [mm] – 2250

Weight [kg] – 2850

Strength [tn] – 150

Engine power [kw] – 7.5

Throat depth [mm] – 375

Working speed [mm / sec] – 3.9

Access speed [mm / sec] – 20

Return speed [mm / sec] – 31

Pressure [bar] – 320

Piston stroke [mm] – 250

Bottom table size [mm] – 900 x 650

Upper table size [mm] – 700 x 450

Vertical height [mm] – 400

Working height [mm] – 950

Overall length (side) [mm] – 1750

Overall width (front) [mm] – 1330

Total height [mm] – 2395

Weight [kg] – 4700

Optional equipment

  • 600 mm vertical clearance
  • 800 mm vertical clearance
  • Piston stroke 450mm
  • Mechanical cylinder adjustment (only available for CM-80 and CM-100
  • PLC SIEMENS mod. SIMATIC S7 1200 with 7 “touch screen mod. KTP-700
  • Hydraulic cooling devices through an air-oil system
  • Hydraulic cushion
  • Hydraulic ejector located on the upper or lower table or both

Available models

  • CM-50
  • CM-80
  • CM-100
  • CM-150

Larger sizes / tonnage models are available on special order.

Presses with a C frame consist of a welded steel frame ST-52.3 and have been designed for stamping, stamping and forming as part of the production line.
CM models are equipped with a mechanized bottom table (made of CK-42 stainless steel) and two T-slots (DIN650) and a mechanized top table (made of CK-42 stainless steel) and two T-slots (DIN650). The top table ensures perfect alignment thanks to the four cylindrical guides.

  • The press has a double-acting cylinder (with rotation protection) with a chrome-plated piston rod and the cylinder stroke, which is easy to adjust on both sides of the press.
  • The electric hydraulic unit is equipped with two speeds and automatic high speed disconnection. It also has a pressure reducer and a manometer graduated in tonnes.
  • The control panel is equipped with a manual or semi-automatic mode switch and a switch of two actuator speeds (high approach speed and low operating speed).
  • Operation on CM models is carried out with the help of two low-voltage foot switches.
  • Safety on models with the C-frame is guaranteed by two side protective screens (which can be opened) with class IV photoelectric sensors on the front.
  • The press can be delivered with optional hydraulic cushions or ejectors, at a higher speed or geometry suited to your requirements.
  • The device has a two-year warranty, is made in Europe and meets the latest requirements of the CE certificate.

Hydraulic presses with top and bottom tables

prasa hydrauliczna 200 ton

Specification

Strength [tn] – 80

Engine power [kw] – 7.5

Throat depth [mm] – 340

Working speed [mm / sec] – 9

Approach speed [mm / sec] – 108

Return speed [mm / sec] – 155

Pressure [bar] – 290

Piston stroke [mm] – 450

Bottom table size [mm] – 800 x 550

Upper table size [mm] – 650 x 400

Vertical height [mm] – 650

Working height [mm] – 850

Overall length (side) [mm] – 2050

Overall width (front) [mm] – 1210

Total height [mm] – 2630

Weight [kg] – 2850

Strength [tn] – 100

Engine power [kw] – 7.5

Throat depth [mm] – 375

Working speed [mm / sec] – 8

Approach speed [mm / sec] – 108

Return speed [mm / sec] – 155

Pressure [bar] – 290

Piston stroke [mm] – 450

Bottom table size [mm] – 850 x 600

Upper table size [mm] – 700 x 450

Vertical height [mm] – 650

Working height [mm] – 900

Overall length (side) [mm] – 2340

Overall width (front) [mm] – 1240

Total height [mm] – 2625

Weight [kg] – 3900

Strength [tn] – 150

Engine power [kw] – 7.5

Throat depth [mm] – 400

Working speed [mm / sec] – 5.2

Approach speed [mm / sec] – 70

Working speed [mm / sec] – 105

Pressure [bar] – 290

Piston stroke [mm] – 450

Guide diameter [mm] – 50

Bottom table size [mm] – 900 x 650

Upper table size [mm] – 750 x 500

Vertical height [mm] – 650

Working height [mm] – 950

Overall length (side) [mm] – 2135

Overall width (front) [mm] – 1360

Total height [mm] – 2910

Weight [kg] – 4100

Optional equipment

  • 800 mm vertical clearance
  • Adaptation for a robot
  • Hydraulic connections for peripheral systems
  • Hydraulic cushion
  • Hydraulic ejector

Available models

  • CF-80
  • CF-100
  • CF-150

Larger sizes / tonnage models are available on special order.

  • Presses with a C frame consist of a welded frame of ST-52.3 steel and have been designed for stamping, stamping and forming medium and large batches as part of the production line.
  • CF models are equipped with a mechanized bottom table (made of CK-42 stainless steel) and four T-slots (DIN650) and a mechanized top table (made of CK-42 stainless steel) and four T-slots (DIN650). The top table ensures perfect alignment thanks to the four cylindrical guides.
  • It is equipped with a single-acting main cylinder and two high-speed side double cylinders, all with a chromed piston rod.
  • Two mechanized hydraulic units automatically disconnect the high speed when resistance is felt. The press also has an early filling valve and a constant flow pump for working with constant pressure. The hydraulic assembly is also equipped with a check valve, overflow valve, safety valve and manometer scaled in tonnes, as well as an oil cooler.
  • The control panel uses the Siemens NC controller to allow the selection between manual and semi-automatic modes, to regulate the operating pressure and stroke of the actuator, as well as to select two different actuator speeds. This control system allows programming of up to 99 different work cycles.
  • Service on CF models is carried out with the help of two low-voltage foot switches.
  • Safety on models with the C-frame is guaranteed by two side protective screens (which can be opened) with class IV photoelectric sensors on the front.
  • The press can be supplied with optional hydraulic cushions or ejectors, robotic adaptation.
  • The device has a two-year warranty, is made in Europe and meets the latest requirements of the CE certificate.

Four column presses

prasa czterokolumnowa

Available models

  • MV-50
  • MV-80
  • MV-100
  • MV-150
  • MV-220
  • MV-300

Larger sizes / tonnage models are available on special order.

Specification

Strength [tn] – 50

Engine power [kw] – 4

Working speed [mm / sec] – 6.3

Approach speed [mm / sec] – 32

Return speed [mm / sec] – 42

Piston stroke [mm] – 450

Guide diameter [mm] – 60

Usable table dimensions [mm] – 750 x 620

Between the columns [mm] – 750 x 410

Vertical space [mm] – 600

Working height [mm] – 800

Overall length (side) [mm] – 1020

Overall width (front) [mm] – 1470

Total height [mm] – 2650

Weight [kg] – 3200

Strength [tn] – 80

Engine power [kw] – 5.5

Working speed [mm / sec] – 6

Approach speed [mm / sec] – 25

Return speed [mm / sec] – 36

Piston stroke [mm] – 450

Guide diameter [mm] – 80

Usable table dimensions [mm] – 900 x 850

Between the columns [mm] – 900 x 600

Vertical space [mm] – 600

Working height [mm] – 800

Overall length (side) [mm] – 1330

Overall width (front) [mm] – 1680

Total height [mm] – 2685

Weight [kg] – 3400

Strength [tn] – 100

Engine power [kw] – 7.5

Working speed [mm / sec] – 6.2

Approach speed [mm / sec] – 31

Return speed [mm / sec] – 48

Piston stroke [mm] – 450

Guide diameter [mm] – 100

Usable table dimensions [mm] – 1050 x 950

Between the columns [mm] – 1050 x 650

Vertical space [mm] – 650

Working height [mm] – 800

Overall length (side) [mm] – 1430

Overall width (front) [mm] – 1880

Total height [mm] – 2780

Weight [kg] – 4300

Strength [tn] – 150

Engine power [kw] – 7.5

Working speed [mm / sec] – 3.9

Access speed [mm / sec] – 20

Return speed [mm / sec] – 31

Piston stroke [mm] – 450

Guide diameter [mm] – 120

Usable table dimensions [mm] – 1050 x 950

Between the columns [mm] – 1050 x 590

Vertical space [mm] – 700

Working height [mm] – 800

Overall length (side) [mm] – 1490

Overall width (front) [mm] – 1940

Total height [mm] – 2885

Weight [kg] – 5580

Strength [tn] – 220

Engine power [kw] – 11

Working speed [mm / sec] – 3.8

Approach speed [mm / sec] – 17

Return speed [mm / sec] – 30

Piston stroke [mm] – 450

Guide diameter [mm] – 120

Usable table dimensions [mm] – 1200 x 950

Between the columns [mm] – 1200 x 590

Vertical space [mm] – 750

Working height [mm] – 900

Overall (side) length [mm] – 1450

Overall width (front) [mm] – 2240

Total height [mm] – 3125

Weight [kg] – 8500

Strength [tn] – 300

Engine power [kw] – 11

Working speed [mm / sec] – 2.8

Approach speed [mm / sec] – 13

Working speed [mm / sec] – 18

Piston stroke [mm] – 450

Guide diameter [mm] – 150

Usable table dimensions [mm] – 1300 x 1000

Between the columns [mm] – 1300 x 570

Vertical space [mm] – 800

Working height [mm] – 900

Overall (side) length [mm] – 1500

Overall width (front) [mm] – 2650

Total height [mm] – 3250

Weight [kg] – 10 800

Optional equipment

  • Proportional pressure and flow valves
  • PLC SIEMENS mod. SIMATIC S7 1200 with 7 “touch screen mod. KTP-700
  • Front retractable bottom table
  • Hydraulic cushion
  • Hydraulic ejector located on the upper or lower table or both
  • Adaptation to robotics
  • Cooling devices for the hydraulic group through the air-oil system
  • High speed thanks to filling valves and side cylinders
    Hydraulic connections to peripheral systems

Production presses

prasa hydrauliczna 500 ton

Specification

Strength [tn] – 80

Engine power [kw] – 5.5

Working speed [mm / sec] – 6

Approach speed [mm / sec] – 25

Return speed [mm / sec] – 36

Pressure [bar] – 320

Piston stroke [mm] – 250

Guide diameter [mm] – 50

Bottom table dimensions [mm] – 700 x 500

Upper table dimensions [mm] – 600 x 450

Vertical height [mm] – 400

Front clearance [mm] – 800

Working height [mm] – 900

Overall length (side) [mm] – 1025

Overall width (front) [mm] – 1500

Total height [mm] – 2500

Weight [kg] – 2080

Strength [tn] – 100

Engine power [kw] – 7.5

Working speed [mm / sec] – 6.2

Approach speed [mm / sec] – 30

Return speed [mm / sec] – 48

Pressure [bar] – 320

Piston stroke [mm] – 250

Guide diameter [mm] – 50

Bottom table dimensions [mm] – 700 x 500

Upper table dimensions [mm] – 600 x 450

Vertical height [mm] – 400

Front clearance [mm] – 800

Working height [mm] – 900

Overall length (side) [mm] – 1075

Overall width (front) [mm] – 1525

Total height [mm] – 2575

Weight [kg] – 2340

Strength [tn] – 150

Engine power [kw] – 7.5

Working speed [mm / sec] – 3.9

Access speed [mm / sec] – 20

Return speed [mm / sec] – 30

Pressure [bar] – 320

Piston stroke [mm] – 250

Guide diameter [mm] – 50

Bottom table dimensions [mm] – 750 x 550

Dimensions of the upper table [mm] – 650 x 500

Vertical height [mm] – 400

Front clearance [mm] – 850

Working height [mm] – 950

Overall length (side) [mm] – 1110

Overall width (front) [mm] – 1750

Total height [mm] – 2720

Weight [kg] – 3250

Strength [tn] – 220

Engine power [kw] – 11

Working speed [mm / sec] – 3.8

Approach speed [mm / sec] – 17

Return speed [mm / sec] – 30

Pressure [bar] – 320

Piston stroke [mm] – 300

Guide diameter [mm] – 60

Bottom table dimensions [mm] – 800 x 600

Upper table dimensions [mm] – 700 x 550

Vertical clearance [mm] – 500

Front clearance [mm] – 900

Working height [mm] – 1000

Overall length (side) [mm] – 1095

Overall width (front) [mm] – 1875

Total height [mm] – 3045

Weight [kg] – 4680

Strength [tn] – 300

Engine power [kw] – 11

Working speed [mm / sec] – 2.8

Approach speed [mm / sec] – 13

Return speed [mm / sec] – 19

Pressure [bar] – 320

Piston stroke [mm] – 300

Guide diameter [mm] – 60

Bottom table dimensions [mm] – 850 x 650

Upper table dimensions [mm] – 750 x 600

Vertical clearance [mm] – 500

Front clearance [mm] – 950

Working height [mm] – 1000

Overall length (side) [mm] – 1225

Overall width (front) [mm] – 2025

Total height [mm] – 3130

Weight [kg] – 6490

Strength [tn] – 500

Engine power [kw] – 15

Working speed [mm / sec] – 2.4

Approach speed [mm / sec] – 10

Return speed [mm / sec] – 17

Pressure [bar] – 320

Piston stroke [mm] – 500

Guide diameter [mm] – 80

Bottom table dimensions [mm] – 1000 x 850

Dimensions of the upper table [mm] – 100 x 800

Vertical height [mm] – 700

Front clearance [mm] – 1150

Working height [mm] – 1000

Overall length (side) [mm] – 1470

Overall width (front) [mm] – 2585

Total height [mm] – 3610

Weight [kg] – 12150

Available models

  • RM-80
  • RM-100
  • RM-150
  • RM-220
  • RM-300
  • RM-500

Hydraulic presses from RHTC consist of a welded frame of ST-52.3 steel and have been designed for stamping, shaping, stamping and forming as part of an automatic production line.
They are equipped with a mechanized bottom table (made of CK-42 stainless steel) with two T-slots (DIN650) and a mechanized top table (made of CK-42 stainless steel) with two T-slots (DIN650). Four lateral cylindrical guides are installed to ensure perfect linearity of the upper table.

  • Production presses are equipped with a double-acting cylinder and its guide, chrome-plated piston rod and piston protection against rotation.
  • The two-speed mechanized hydraulic unit with automatic high speed disconnection is equipped with a decompression valve, pressure reducer and pressure gauge calibrated in tonnes.
  • Adjusting the position of the upper table is controlled from the side panel. The control panel also has a manual and semi-automatic mode switch as well as a two-speed switch (high approach speed and low operating speed).
  • Operation is carried out using a low-voltage foot switch.
  • Safety is guaranteed by level IV photoelectric sensors located on the front of the press and two protective panels (which can be opened) and a microswitch located on the back.
  • The press can be delivered with optional hydraulic cushions or ejectors (on the upper and / or lower table), Siemens NC control or geometry adapted to your requirements.
  • The device has a two-year warranty, is made in Europe and meets the latest requirements of the CE certificate.

Log in with your credentials

Forgot your details?