ul. Pogodna 11, 16-020 Czarna Białostocka

UPV80

UPV80

wykrojnik otwory technologiczne

“WEDGE-SHAPED” BLANKING TOOL FOR PUNCHING HOLES FOR GALVANIZATION

Max. thickness: 4 mm
Notch regulation

wykrojnik otwory technologiczne pod ocynk

“WEDGE-SHAPED” BLANKING TOOL FOR PUNCHING HOLES FOR GALVANIZATION IN CORNERS

Max. thickness: 4 mm
Notch regulation

wykrojnik otwory technologiczne

“BEAN-SHAPED” BLANKING TOOL FOR PUNCHING HOLES FOR GALVANIZATION

Max. thickness: 4 mm
Notch regulation

wykrojnik przenikanie rur

BLANKING TOOL FOR PERPENDICULAR PIPE JOINING

Max. thickness: 3.2 mm
Max. diameter: ⌀60

wykrojnik do łączenia rur

BLANKING TOOL FOR PERPENDICULAR JOINING OF PIPES WITH FLASH FOR GALVANIZATION

Max. thickness: 3.2 mm
Max. diameter: ⌀60

otwory do podwieszania profili w malarni

BLANKING TOOL FOR PUNCHING HOLES FOR SUSPENSION

Max. thickness: 4 mm
Max. dimension: ⌀10

BLANKING TOOL FOR PUNCHING RECTANGLES IN PROFILES

Max. thickness: 4 mm
Max. rectangle dimensions: 10 mm x 15 mm

wykrojnik do cięcia ceownika

BLANKING TOOL FOR CUTTING CHANNEL SECTIONS

Max. dimensions: 50 mm x 50 mm
Max. thickness: 2 mm

wykrojnik do cięcia pręta

BLANKING TOOL FOR ROD CUTTING

Max. thickness: 16 mm
Cutting of square and round rods

wykrojnik do naroży

BLANKING TOOL FOR ROUNDING SHEET CORNERS

Max. thickness: 5 mm
Radii: 10mm, 15mm, 20mm, 28mm

BLANKING TOOL FOR PUNCHING SHEET CORNERS 100×100

Max. thickness: 3 mm
Max. dimension: 100 mm x 100 mm

COLUMN BLANKING TOOL FOR HOLE PUNCHING IN PROFILES

Max. dimension: 60 mm x 60 mm
Max. thickness: 3 mm

wykrojnik do cięcia płaskownika

BLANKING TOOL FOR CUTTING FLAT BARS

Max. width: 50 mm
Max. thickness: 5 mm

UPV80 is our flagship hydraulic press, ideally suited for work such as:

  • cutting
  • punching
  • stamping
  • crimping
  • drawing

A hole 100 mm in diameter has been made centrally under the piston in the table and in the lower part of the body, enabling e.g. waste from punching operations to fall through freely.
Thanks to the possibility of exchanging tables, the machine can be adapted for work with materials of larger or smaller dimensions.
The vertical hydraulic press is characterized by:

  • rigidity
  • force
  • repeatability
  • intuitive control
  • failure-free operation
  • mobility

The machine has two work modes, manual and automatic:

– manual: allows for control of piston extension throughout its entire working range, i.e. 150 mm, by means of footpedal switches (left – extension, right – retraction). This mode enables precise positioning of e.g. blanking tools and stamping dies).

– automatic: the press repeatedly performs a piston cycle predefined by the operator by means of just one switch.

The UPV80 has ProFace touch control by Schneider Electric. Using this option, it is possible to set the piston’s position to even 0.1 mm.

MACHINE
  • The machine is driven by a 250bar 7.5kW pump
  • Max. The pressing force of 80T is generated by a hydraulic actuator with a piston diameter of 120mm
  • Control of the hydraulic actuator is possible at every stage of its work
  • The worktable, with dimensions 650mm x 490mm, includes T-channels enabling mounting of tools and instruments required for work
  • The threaded tip of the M120x6 stamping die makes it possible to apply various types of nuts for tool fastening
CONTROL
  • The press has been equipped with an electrical cabinet with implemented control
  • The hydraulic actuator is controlled by footpedal switches
  • The piston’s stroke is regulated by an electronic controller, thanks to which it is possible to set the position of the working tool with accuracy to 0.1mm, allowing the operator to define the limits of the actuator’s operation
  • Adjustment of the piston’s extension speed and pressing force is made possible by hydraulic valves available to the operator
  • Machine operation takes place in automatic or manual mode
SAFETY
  • CE mark: The machine is compliant with the health and safety conditions laid down in the EU Machinery Directive 2006/42/EC
  • The machine has four emergency stop buttons that make it possible to stop the machine’s operation at any time during work
MACHINE TRANSPORT
  • The machine has been equipped with forklift pockets for transport.
MOTOR POWER

7.5 kW

MOTOR ROTATIONAL SPEED

1450 rpm/min

PRESSING FORCE

80 000 kg

PISTON STROKE SPEED

10 mm/s

OVERALL DIMENSIONS
  • length: 1,200 mm
  • height: 1,800 mm
  • width: 870 mm
HYDRAULIC UNIT POWER

250 bar

SELF-WEIGHT

2100 kg

PISTON STROKE

150 mm

TABLE

650 mm x 490 mm

Log in with your credentials

Forgot your details?