24-month warranty
hardened piston rod
positioning accuracy to 0.1 mm
100 tonnes of pressure
piston stroke 150 mm
manufactured using CNC technology
CE certificate

Polish product
interchangeable tables
illuminated work area
European components
counting operating cycles
a 100 mm diameter through-hole in the table
The UPV100TT is our flagship hydraulic press with an overhead table, ideally suited to tasks such as:
- cut
- die-cutting
- stamping
- press-fitting
- extrusion
A 100 mm diameter hole has been cut centrally beneath the ram in the table and in the lower part of the body, allowing, for example, scrap to fall out freely during the punching operation.
Thanks to the ability to swap tables, we can adapt the machine to work with materials of larger or smaller dimensions.
A vertical hydraulic press is characterised by:
- stiffness
- strength
- repeatability
- intuitive controls
- reliability
- mobility
The machine has two operating modes: manual and automatic:
– manual: allows the piston stroke to be controlled across the entire working range, i.e. 150 mm, using foot switches (left – forward, right – reverse). This mode allows for the precise positioning of, for example, cutting dies and punches.
– automatic: with just a single switch, the press repeatedly performs a piston cycle previously set by the operator.
The UPV100TT features a ProFace touchscreen control system by Schneider Electric. This feature allows the piston position to be adjusted with a precision of up to 0.1 mm.

Machine
- The machine is powered by a 250 bar, 11 kW unit
- A maximum pressure of 100 tonnes is generated by a hydraulic cylinder with a piston diameter of 220 mm
- The hydraulic actuator can be controlled at any stage of its operation
- The workbench, measuring 800mm x 490mm, features T-slots that allow for the mounting of tools and equipment required for the work
- The 40 mm spindle socket allows for the fitting of various types of tools
Controls
- The press is fitted with an electrical box incorporating the control system
- The hydraulic cylinder is controlled via foot pedals
- The piston stroke is controlled by an electronic controller, which enables the position of the working tool to be set with an accuracy of 0.1 mm, allowing the operator to define the end positions of the actuator’s travel
- The piston extension speed and pressure force can be adjusted using the hydraulic valves accessible to the operator
- The machine operates in either automatic or manual mode
Safety
- CE marking: The machine complies with the health and safety requirements of the European Union’s Machinery Directive 2006/42/EC
- The machine is fitted with four emergency stop buttons, allowing the machine to be stopped at any time during operation
Transport of the machine
- The machine is fitted with a lifting eye for forklift forks.
Technical specifications
| Engine power | 11 kW |
|---|---|
| Engine speed | 1,450 rpm |
| Pressure force | 100,000 kg |
| Piston extension speed | 10 mm/s |
| Overall dimensions | length: 1200 mm, height: 1800 mm, width: 870 mm |
| Power of the generator set | 250 bar |
| Unladen weight | 2,600 kg |
| Piston stroke | 150 mm |
| Lower table | 800 mm × 490 mm |
| Top table | 700 mm × 360 mm |
| Optional |
|

