WSX50

✓

CE certificate

✓

manufactured using CNC technology

✓

Polish product

✓

European components

✓

50 mm diameter rollers

✓

roller spacing 300 mm

Advantages of the machine
✓

profile guide rollers

✓

three-roller drive (the top roller can be detached)

✓

hydraulic or screw clamp

✓

working in an upright and horizontal position

✓

24-month warranty

✓

maximum profile 70x70x3

Prices start from 20,400 PLN

The WSX50 is a stationary rolling mill for arcs and spirals. The use of modular rollers means that the rolling mill can handle a wide range of workpiece dimensions. As they are made from 40HM steel, they offer long-lasting wear resistance.

The rolling mill is available in three versions:
– screw clamping,
– manual hydraulic clamping,
– electric-hydraulic clamping.

Thanks to the 3-roller drive, it is possible to roll smaller structural sections in a single pass. We can also quickly deactivate the upper roller using the side lever without any difficulty.

The WSX50 operates in both vertical and horizontal positions, making the machine more versatile. Changing the position is quick and hassle-free thanks to the telescopic cylinder.

Machine

  • Two-position operation: The rolling mill operates in both vertical and horizontal positions. Changing the position is instantaneous thanks to the use of a telescopic cylinder.
  • Design: The power transmission components consist of hardened gears.
  • Hardened power transmission and load-bearing components: To ensure reliable machine operation, all critical components are made from high-grade materials that have undergone heat treatment.
  • Controls: The machine is controlled by an electrical control box built into the housing, manufactured by Schneider.

Drive

  • The gear motor ensures quiet, smooth operation of the machine.
  • Drive system for all rollers: All three rollers on the machine are driven, with the option to disengage the upper bending roller.
  • Foot-operated control panel: The roller drive is controlled by two foot switches.

Clamping

Adjustment of the upper roller and bending of the profile is carried out by turning the lever located at the bottom of the machine, using a manual hydraulic pump or via the control panel, depending on the configuration.

Bending rollers

  • Modular rollers: The machine is fitted with modular straight bending rollers for rolling structural sections and flat bars. A single set of rollers can be adjusted to suit a wide range of rolled profile dimensions. The rollers are made from 40HM steel, which eliminates the problem of the rollers seizing up against the profile. The machine can be fitted with additional rollers for rolling tubes and bars.

Safety

  • CE marking: The machinery complies with the essential health and safety requirements of the European Union’s Machinery Directive 2006/42/EU.
  • Safety buttons: these ensure that the machine can be stopped immediately at any time.

Transport of the machine

  • The machine is fitted with slots for forklift forks, which allows it to be moved around the workplace with ease.

Technical specifications

Mass

430 kg

Rated voltage

230V/400V/50Hz

Engine speed

1,400 rpm

Rotational speed of the bending rollers

11 rpm

Overall dimensions

length: 800 mm, height: 1750 mm, width: 1200 mm

Noise level

55 dB

Engine power

1.5 kW

Diameter of the rollers

50 mm

Spacing between the lower rollers

300 mm

Maximum rolling dimensions

70 mm × 70 mm × 3 mm / Ø70 mm × 3 mm

Optional
  • Available bending roller clamps: screw-type, hydraulic with a hand pump, hydraulic with an electric power unit,
  • manufacture of polyamide rollers to fit the selected diameter of a stainless steel pipe,
  • manufacture of hardened steel rollers to the specified diameter of the steel pipe,
  • manufacture of rollers for special profiles