ul. Pogodna 11, 16-020 Czarna Białostocka

UPV50

producent pras 50 ton

UPV50

wykrojnik otwory technologiczne

WYKROJNIK DO WYKRAWANIA OTWORÓW TECHNOLOGICZNYCH POD OCYNK „KSZTAŁT KLINA”

Max. grubość: 4mm
Regulacja nacięcia

wykrojnik otwory technologiczne pod ocynk

WYKROJNIK DO WYKRAWANIA OTWORÓW TECHNOLOGICZNYCH POD OCYNK „KSZTAŁT KLINA” W NAROŻACH

Max. grubość: 4mm
Regulacja nacięcia

wykrojnik otwory technologiczne

WYKROJNIK DO WYKRAWANIA OTWORÓW TECHNOLOGICZNYCH POD OCYNK „KSZTAŁT FASOLKA”

Max. grubość: 4mm
Regulacja nacięcia

wykrojnik przenikanie rur

WYKROJNIK DO PROSTOPADŁEGO ŁĄCZENIA RUR

Max. grubość: 3.2mm
Max. średnica: ⌀60

wykrojnik do łączenia rur

WYKROJNIK DO PROSTOPADŁEGO ŁĄCZENIA RUR Z WYPŁYWKĄ POD OCYNK

Max. grubość: 3.2mm
Max. średnica: ⌀60

otwory do podwieszania profili w malarni

WYKROJNIK DO WYKRAWANIA OTWORÓW TECHNOLOGICZNYCH DO PODWIESZANIA

Max. grubość: 4mm
Max. wymiar: ⌀10

WYKROJNIK DO WYKRAWANIA PROSTOKĄTÓW W PROFILACH

Max. grubość: 4mm
Max. wymiar prostokątów: 10mmx15mm

wykrojnik do cięcia ceownika

WYKROJNIK DO CIĘCIA CEOWNIKA

Max. wymiary: 50mmx50mm
Max. grubość: 2mm

wykrojnik do cięcia pręta

WYKROJNIK DO CIĘCIA PRĘTA

Max. grubość: 16mm
Cięcie prętów kwadratowych oraz okrągłych

wykrojnik do naroży

WYKROJNIK DO ZAOKRĄGLANIA NAROŻY BLACH

Max. grubość: 5mm
Promienie: 10mm, 15mm, 20mm, 28mm

WYKROJNIK DO WYKRAWANIA NAROZY BLACH 100×100

Max. grubość: 3mm
Max. wymiar: 100mmx100mm

WYKROJNIK KOLUMNOWY DO OTWOROWANIA PROFILI

Max. wymiar : 60mmx60mm
Max. grubość: 3mm

wykrojnik do cięcia płaskownika

WYKROJNIK DO CIĘCIA PŁASKOWNIKA

Max. szerokość: 50mm
Max. grubość: 5mm

UPV50 is our medium hydraulic press, ideally suited for work such as:

  • cutting
  • punching
  • stamping
  • crimping
  • drawing

A hole 100 mm in diameter has been made centrally under the piston in the table and in the lower part of the body, enabling e.g. waste from punching operations to fall through freely.
Thanks to the possibility of exchanging tables, the machine can be adapted for work with materials of larger or smaller dimensions.
The vertical hydraulic press is characterized by:

  • rigidity
  • force
  • repeatability
  • intuitive control
  • failure-free operation
  • mobility

The machine has two work modes, manual and automatic:

– manual: allows for control of piston extension throughout its entire working range, i.e. 150 mm, by means of footpedal switches (left – extension, right – retraction). This mode enables precise positioning of e.g. blanking tools and stamping dies).

– automatic: the press repeatedly performs a piston cycle predefined by the operator by means of just one switch.

The UPV50 has ProFace touch control by Schneider Electric. Using this option, it is possible to set the piston’s position to even 0.1 mm.

MACHINE
  • The machine is driven by a 250bar 5.5kW pump
  • Max. The pressing force of 50T is generated by a hydraulic actuator with a piston diameter of 80mm
  • Control of the hydraulic actuator is possible at every stage of its work
  • The worktable, with dimensions 650mm x 490mm, includes T-channels enabling mounting of tools and instruments required for work
  • A dia. 40 pin can be used to mount various types of tools
CONTROL
  • The press has been equipped with an electrical cabinet with implemented control
  • The hydraulic actuator is controlled by footpedal switches
  • The piston’s stroke is regulated by an electronic controller, thanks to which it is possible to set the position of the working tool with accuracy to 0.1mm, allowing the operator to define the limits of the actuator’s operation
  • Adjustment of the piston’s extension speed and pressing force is made possible by hydraulic valves available to the operator
  • Machine operation takes place in automatic or manual mode
SAFETY
  • CE mark: The machine is compliant with the health and safety conditions laid down in the EU Machinery Directive 2006/42/EC
  • The machine has four emergency stop buttons that make it possible to stop the machine’s operation at any time during work
MACHINE TRANSPORT
  • The machine has been equipped with forklift pockets for transport
MOTOR POWER

5.5 kW

MOTOR ROTATIONAL SPEED

1450 rpm

PRESSING FORCE

50 000 kg

PISTON STROKE SPEED

10 mm/s

OVERALL DIMENSIONS
  • length: 1050 mm
  • height: 2,100 mm
  • width: 850 mm
HYDRAULIC UNIT POWER

250 bar

SELF-WEIGHT

1400 kg

PISTON STROKE

150 mm

TABLE

650 mm x 490 mm

Log in with your credentials

Forgot your details?