ul. Pogodna 11, 16-020 Czarna Białostocka

UPV28

UPV28

wykrojnik otwory technologiczne

“WEDGE-SHAPED” BLANKING TOOL FOR PUNCHING HOLES FOR GALVANIZATION

Max. thickness: 4mm

Notch regulation

wykrojnik otwory technologiczne pod ocynk

“WEDGE-SHAPED” BLANKING TOOL FOR PUNCHING HOLES FOR GALVANIZATION IN CORNERS

Max. thickness: 4mm

Notch regulation

wykrojnik otwory technologiczne

“BEAN-SHAPED” BLANKING TOOL FOR PUNCHING HOLES FOR GALVANIZATION

Max. thickness: 4mm

Notch regulation

wykrojnik przenikanie rur

BLANKING TOOL FOR PERPENDICULAR PIPE JOINING

Max. thickness: 3.2mm

Max. diameter: ⌀60

wykrojnik do łączenia rur

BLANKING TOOL FOR PERPENDICULAR JOINING OF PIPES WITH FLASH FOR GALVANIZATION

Max. thickness: 3.2mm

Max. diameter: ⌀60

otwory do podwieszania profili w malarni

BLANKING TOOL FOR PUNCHING HOLES FOR SUSPENSION

Max. thickness: 4mm

Max. dimension: ⌀10

BLANKING TOOL FOR PUNCHING RECTANGLES IN PROFILES

Max. thickness: 4mm

Max. rectangle dimensions: 10mmx15mm

wykrojnik do cięcia ceownika

BLANKING TOOL FOR CUTTING CHANNEL SECTIONS

Max. dimensions: 50mmx50mm

Max. thickness: 2mm

wykrojnik do cięcia pręta

BLANKING TOOL FOR ROD CUTTING

Max. thickness: 16mm

Cutting of square and round rods

wykrojnik do naroży

BLANKING TOOL FOR ROUNDING SHEET CORNERS

Max. thickness: 5mm

Radii: 10mm, 15mm, 20mm, 28mm

BLANKING TOOL FOR PUNCHING SHEET CORNERS 80×80

Max. thickness: 3mm

Max. dimension: 80mmx80mm

COLUMN BLANKING TOOL FOR PUNCHING HOLES IN PROFILES

Max. dimension: 60mmx60mm
Max. thickness: 3mm

wykrojnik do cięcia płaskownika

BLANKING TOOL FOR CUTTING FLAT BARS

Max. width: 50mm

Max. thickness: 5mm

UPV28 is our flagship hydraulic press, ideally suited for work such as:

  • cutting
  • punching
  • stamping
  • trimming
  • crimping
  • drawing

 

A hole 40mm in diameter has been made centrally under the piston in the table and in the lower part of the body, enabling e.g. waste from punching operations to fall through freely.

Thanks to the possibility of exchanging tables, the machine can be adapted for work with materials of larger or smaller dimensions.

The vertical hydraulic press is characterized by:

  • rigidity
  • force
  • repeatability
  • intuitive control
  • failure-free operation
  • mobility

 

The machine has two work modes, manual and automatic:

– manual: allows for control of piston extension throughout its entire working range, i.e. 150 mm, by means of footpedal switches (left – extension, right – retraction). This mode enables precise positioning of e.g. blanking tools and stamping dies).

– automatic: the press repeatedly performs a piston cycle predefined by the operator by means of just one switch.

 

UPV 28 has 2 digital displays, displaying the programmable limits of the piston’s extension and return. Using this option, it is possible to set the piston’s position to even 0.1 mm.

Machine
  • The machine is driven by a 220bar 4kW pump
  • The pressing force of 28T is generated by a hydraulic actuator with a piston diameter of 130mm
  • Control of the hydraulic actuator is possible at every stage of its work
  • The worktable, with dimensions 300x325mm or 700×355, includes several rows of threaded M12 holes enabling installation of tools and instruments required for work
  • The threaded tip of the M55x2 stamping die makes it possible to apply various types of nuts for tool fastenin
Control
  • The press has been equipped with an electrical cabinet with implemented control
  • The hydraulic actuator is controlled by footpedal switches
  • The piston’s stroke is regulated by an electronic controller, thanks to which it is possible to set the position of the working tool with accuracy to 0.1mm, allowing the operator to define the limits of the actuator’s operation
  • Adjustment of the piston’s extension speed and pressing force is made possible by hydraulic valves available to the operator
  • Machine operation takes place in automatic or manual mode
Safety
  • CE mark: The machine is compliant with the health and safety conditions laid down in the EU Machinery Directive 2006/42/EC
  • The machine has four emergency stop buttons that make it possible to stop the machine’s operation at any time during work
  • Footpedals are equipped with a lock preventing sudden start-up and uncontrolled machine operation
Machine transport
  • The machine has been equipped with forklift pockets for transport
Motor power

4 kW

Motor revolutions

1400 rpm

Pressing force

28 000 kg

Piston extension speed

10 mm/s

Overall dimensions
  • length: 600 mm
  • height: 2000 mm
  • width: 550 mm
Pump power

200 bar

Self-weight

650 kg

Piston stroke

150 mm

Table

300 mm x 325 mm or optionally 700 mm x 350 mm

Log in with your credentials

Forgot your details?