UPV100

✓

24-month warranty

✓

hardened piston rod

✓

positioning accuracy to 0.1 mm

✓

100 tonnes of pressure

✓

piston stroke 150 mm

✓

manufactured using CNC technology

✓

CE certificate

Advantages of the machine
✓

Polish product

✓

interchangeable tables

✓

illuminated work area

✓

European components

✓

counting operating cycles

✓

a 100 mm diameter through-hole in the table

✓

piston rod with a 40 mm socket at the end

Prices start from 85,800 PLN

The UPV100 is a larger hydraulic press, ideally suited to tasks such as:

  • cut
  • die-cutting
  • stamping
  • press-fitting
  • extrusion

A 100 mm diameter hole has been cut centrally beneath the ram in the table and in the lower part of the body, allowing, for example, scrap to fall out freely during the punching operation.
Thanks to the ability to swap tables, we can adapt the machine to work with materials of larger or smaller dimensions.
A vertical hydraulic press is characterised by:

  • stiffness
  • strength
  • repeatability
  • intuitive controls
  • reliability
  • mobility

The machine has two operating modes: manual and automatic:

– manual: allows the piston stroke to be controlled across the entire working range, i.e. 150 mm, using foot switches (left – forward, right – reverse). This mode allows for the precise positioning of, for example, cutting dies and punches.

– automatic: with just a single switch, the press repeatedly performs a piston cycle previously set by the operator.

The UPV80 features ProFace touch control by Schneider Electric. This feature allows the piston position to be adjusted with a precision of up to 0.1 mm.

Machine

  • The machine is powered by a 260 bar, 11 kW unit
  • A maximum pressure of 100 tonnes is generated by a hydraulic cylinder with a piston diameter of 220 mm
  • The hydraulic actuator can be controlled at any stage of its operation
  • The workbench, measuring 650mm x 490mm, is fitted with T-slots to allow the mounting of tools and equipment required for the work
  • The 40 mm shank allows for the fitting of various types of tools

Controls

  • The press is fitted with an electrical box incorporating the control system
  • The hydraulic cylinder is controlled via foot pedals
  • The piston stroke is controlled by an electronic controller, which enables the position of the working tool to be set with an accuracy of 0.1 mm, allowing the operator to define the end positions of the actuator’s travel
  • The piston extension speed and pressure force can be adjusted using the hydraulic valves accessible to the operator
  • The machine operates in either automatic or manual mode

Safety

  • CE marking: The machine complies with the health and safety requirements of the European Union’s Machinery Directive 2006/42/EC
  • The machine is fitted with four emergency stop buttons, allowing the machine to be stopped at any time during operation

Transport of the machine

  • The machine is fitted with a lifting eye for forklift forks.

Technical specifications

Engine power

11 kW

Engine speed

1,450 rpm

Pressure force

100,000 kg

Piston extension speed

10 mm/s

Overall dimensions

length: 1200 mm, height: 1800 mm, width: 870 mm

Power of the generator set

250 bar

Unladen weight

2,300 kg

Piston stroke

150 mm

Table

650 mm × 490 mm

Optional
  • increasing the vertical clearance,
  • increasing the piston stroke,
  • fitting of work area guards,
  • installation of safety curtains,
  • acceleration of the piston’s extension speed to 20 mm/s (guards and safety curtains required),
  • replacement of pressure and speed valves with proportional valves