FCP50

✓

24-month warranty

✓

manufactured using CNC technology

✓

hardened piston rod

✓

50 tonnes of pressure

✓

piston stroke 350 mm

✓

CE certificate

Advantages of the machine
✓

Polish product

✓

European components

✓

positioning accuracy to 0.1 mm

✓

counting the operating cycle

✓

adjustment of force and speed

Prices start from 110,200 PLN

The FCP50 is our optimal hydraulic press with an overhead table supported by four columns, ideally suited to tasks such as:

  • cut
  • die-cutting
  • stamping
  • press-fitting
  • extrusion

A hydraulic unit has been built into the lower part of the body. This design reduces the amount of space required to install the baler.

A vertical hydraulic press is characterised by:

  • stiffness
  • strength
  • repeatability
  • intuitive controls
  • reliability

The machine has two operating modes: manual and automatic:

– manual: allows the piston stroke to be controlled across the entire working range, i.e. 350 mm, using foot switches (left – forward, right – reverse). This mode allows for the precise positioning of, for example, cutting dies and punches.

– automatic: with just a single switch, the press repeatedly performs a piston cycle previously set by the operator.

The FCP50 features ProFace touch controls by Schneider Electric. This feature allows the piston position to be adjusted with a precision of up to 0.1 mm.

Machine

  • The machine is powered by a 250 bar, 5 kW unit
  • A maximum force of 50 tonnes is generated by a hydraulic cylinder with a piston diameter of 160 mm
  • The hydraulic actuator can be controlled at any stage of its operation
  • Working area between the columns: 560 mm x 270 mm
  • T-slots for mounting the tools and instruments required for the job

Controls

  • The press is fitted with an electrical box incorporating the control system
  • The hydraulic cylinder is controlled via foot pedals
  • The piston stroke is controlled by an electronic controller, which enables the position of the working tool to be set with an accuracy of 0.1 mm, allowing the operator to define the end positions of the actuator’s travel
  • The piston extension speed and pressure force can be adjusted using the hydraulic valves accessible to the operator
  • The machine operates in either automatic or manual mode

Safety

  • CE marking: The machine complies with the health and safety requirements of the European Union’s Machinery Directive 2006/42/EC
  • The machine is fitted with four emergency stop buttons, allowing the machine to be stopped at any time during operation

Transport of the machine

The machine is designed to be transported by forklift.

Technical specifications

Engine power

5 kW

Engine speed

1,450 rpm

Pressure force

50,000 kg

Piston extension speed

10 mm/s

Overall dimensions

length: 670 mm, height: 2460 mm, width: 1110 mm

Power of the generator set

250 bar

Unladen weight

1,950 kg

Vertical clearance

500 mm

Piston stroke

350 mm

Table (between the columns)

560 mm × 270 mm

Optional
  • increasing the vertical clearance,
  • increasing the piston stroke,
  • fitting of work area guards,
  • installation of safety curtains,
  • increasing the piston extension speed to 25 mm/s (safety guards and safety curtains required),
  • replacement of pressure and speed valves with proportional valves